Warranty: | 1 Year |
---|---|
Function: | Pre Milling, Gluing, Edge Banding, Rough Trimming, Fine Trimming, Contour Tracking, Scraping, Buffing |
Type: | Straight Line |
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Model
|
468J
|
Voltage
|
380V, 50Hz, 3 phases
|
Motor power
|
16.5 Kw
|
Oversize
|
7200*760*1600mm
|
Weight
|
3500Kg
|
Feeding speed
|
0~23m/min
|
Panel width
|
≥60mm
|
Panel thickness
|
9~60mm
|
Edge band width
|
10~65mm
|
Edge band thickness
|
0.4~3mm
|
Work pressure
|
0.7Mpa
|
1.SHIHLIN touch screen---High quality touch screen with long lift spam.
Visible operating screen, easy for operating.
2.AUTONICS encoder---By using one encoder and one position limit sensor, the whole bandin procedure will be started by receiving only one signal. Reduce the fault rate. Control the every step with high precision
3.Pre milling--- Using 2 pcs of high wear-resisting blades, work on the waved effect that is caused by precise panel saw. Ensure the edges of panel are good for banding
4.Gluing---Hot melt adhesive is added through the glue pot, and the spiral structure is adopted to feed the adhesive, so that the sheet material and the sealing material can be coated evenly.
5.Trimming (Fine +Rough)--- Eliminate the redundant tape in the top and bottom sides of board.
6.Corner rounding---Four heads corner rounding: high precision guaranteed perfect look and touch.
7.End cutting---Adopt normal high matching technology structure, through precise linear guide movement, adopt automatic tracking by mould and fast cutting structure of high frequency and high speed motor, ensure smooth cutting surface
8.Scraping--- It is used to eliminate the wavy marks caused by the cutting process of trimming non-linear motion, so that the upper and lower parts of the plate are more smooth and neat. At the same time, the size of the arc angle can be adjusted to make the sealing effect more perfect.
9.Polishing---Clean the finished boards with a cotton polishing wheel. Remove excess glue and smooth the end face of sealing edge by polishing
1. Do you offer installation?
Suppliers with verified business licenses